Filter By:
- Bar Ends (11)
- BMX (43)
- Bottom Brackets (187)
- Brakes/Levers/Pads (496)
- Cables (134)
- Cassettes/Freewheels (128)
- Chainrings (211)
- Chains (118)
- Show More Categories
- Cranksets (245)
- Derailleurs (156)
- Forks (122)
- Groups (14)
- Handlebar Grips/Tape (221)
- Handlebars (213)
- Headsets (136)
- Pedals (225)
- Saddles (197)
- Seatposts (87)
- Shift/Brake Combinations (74)
- Shifters (121)
- Shocks (28)
- Stems (122)
- Other (1525)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward
$39.95
- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width
- 9-degree backsweep and 5-degree upsweep for comfort at all angles
- Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction
- Plus model uses 7050 aluminum for an ideal strength to weight ratio
- Base Handlebar uses 6061 aluminum
$46.00
Zipp Speed Weaponry Cartridge Bearings: 6903/61903
$352.00
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD).
The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops.
- Updated distinctive Zipp cosmetics
- 70mm reach and 128mm drop allows for a low and aero drops position
- Internal cable routing is easy with Rapid Route
- Lifetime warranty
$27.00
Zipp's Service Course Bar Tape offers excellent cushioning and a fine grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$30.00 - $34.95
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$14.00
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
$255.00
Zipp's Vuka Bull base bar is the perfect starting point for triathletes and time trial specialists building a high-tech aero cockpit. It's packed with innovations for fit, function, and speed. For aerodynamic efficiency, the carbon Vuka Bull utilizes the watt-saving wing-shape of Zipp's SL-70 Aero bar. Its design also is based on feedback from professional bike fitters, so athletes can maintain optimal aero position. The Vuka Bull is designed to be wide enough to help you control your bike in corners and climb comfortably but narrow enough to not slow you down when you are in the aerobars focusing on fast. The clamping area is wide enough to allow a wide range of armrest positions using the Zipp Vuka Clip. The Vuka Bull features a flip design that gives it a rise or drop, allowing you to have your hands where you need them. This available rise provides athletes with the option to keep the base bar as low as possible while still being able to raise the armrests and extensions where they need to be. Also, a slightly higher hand position can help athletes climb steeper grades. The Vuka Bull is designed with Zipp's Rapid Route technology, now with the ability to move control cables, hoses, and wires through the stem clamp area, making it compatible with modern integrated cockpit systems.
- Wide enough for control—narrow enough to keep you aero
- Designed to allow you to find your fastest position
- Aerodynamic wing shape designed using the CFD-proven wing shape from the SL-70 Aero
- Rapid Routing cable exits are positioned for easy installation of brake cables, now with routing through the stem clamp area
- Updated Zipp cosmetics that scream speed: matte carbon with gloss black logo
$151.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market.
Designed with input from top bike fitters, the shape of the Vuka Evo Extensions are crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position.
- Bar-setting fit, security, and adjustability
- Compatible with most extensions
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$84.95 - $89.95
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop.
Compatibility:
- Shimano GRX cranksets including RX600 and RX810
- Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains
- Drop-Stop B tooth profile is compatible with SRAM Flattop chain
- Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability
- Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
DROP-STOP B
Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC
Not compatible with 12spd Shimano HG+ chains
$64.95
Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings.
- Fits any 94 BCD SRAM crankset
- Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings fit any SRAM mountain bike crankset with a 94 BCD.
Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions.
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)
- Chainline - 49mm
- Provides a great chainline on most boost bikes.
Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
DROP-STOP A
Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 30t • 44g | 32t • 54g | 34t • 63g
- Material: 7075-T6 aluminum
- Made in the USA
- US Patent 958123
$79.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm.
Note -
The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets.
Compatibility:
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets
- Not compatible with Deore triple (3x) cranksets
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most Boost bikes. See this explanation for details.
- Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm
- Drop-Stop ST models will have the same chainline as the Shimano specified chainline
- 10mm bolts are optimized for mounting this ring
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
DROP-STOP ST
- Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g
- Material: 7075-T6 aluminum
- Made in the USA
$84.95 - $89.95
Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8-bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting.
- All SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. These cranksets use either 107 BCD or 94 BCD; any of those cranksets with a removable spider use the 8-bolt mount.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- 6mm offset
- Chainline 45mm
- Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
DROP-STOP B
- Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC
- Not compatible with 12spd Shimano HG+ chains
Recommendations -
- Recommend the use of a clutch-style rear derailleur for the best chain security
- Use the included custom T20 bolts. Torque 4Nm with T20 tool
Tech Specs:
- Weights: 38T/89g | 40T/106g | 42T/109g | 44T/111g
- Material: 7075-T6 aluminum
- Included: set of eight custom T20 stainless steel bolts
- Made in the USA
$29.95
The Wolf Tooth Post To Flat Mount Brake Adapter allows flat mount brakes to be added to a frame or fork that was designed for post mount brakes. This is a vital component for cyclists who want to run a road groupset on a mountain bike frame.
- Please note that this is a +20mm adapter, which means a 140mm post mount native size will only work with a 160mm rotor, just as a 160mm post mount native size will only work with a 180mm rotor, and so on
- Fits on post mount native sizes 140, 160, and 180mm
- Works with rotor sizes 160, 180, and 200mm
- Tested with SRAM and Shimano brakes
- Requires minimum 13mm between top of brake boss to frame/fork
- CNC Machined from 6061-T6 aluminum for strength and light weight
- Includes : (2x) M5x13mm Flat Head bolts for Flat Mount Caliper and (2x) M6x15mm Socket Head bolts for Post Mount
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$21.95
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details
$144.53
Thread-together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Drive Side Bearing: Enduro Angular Contact - Non-Drive Side Bearing: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm – 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm stepped - Over Bearing Width: 91.8mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 145g
$144.53
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width: 86.6mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 133g
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
$61.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
$118.65 - $125.99
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g
$118.65
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g
$99.00 - $144.53
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g
$123.99
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x Silicone dust seals
- 2x 0.5mm crank spindle spacers
- 2x 1.0mm crank spindle spacers
- 1x 2.5mm crank spindle spacer
Specifications:
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: T47
- Bottom Bracket Shell Width (mm): 68mm - 100mm
- Bottom Bracket Shell I.D.: 47x1.0mm Threaded
- Crank Spindle Diameter: 29mm
- Over Bearing Width: 90.8mm in 68mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Tool Pattern: 48.5mm x 16-notch
- Weight: 155g
Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks:
- T47 shell with a width of 68mm and SRAM DUB Road Crank
- T47 shell with a width of 73mm and SRAM DUB MTB Crank
- T47 shell with a width of 100mm and SRAM DUB Fatbike Crank
$106.99
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g
$6.25
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$18.64
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
Page 1 of 157
Next page